VALVES

Cast Steel Gate, Globe, Check Valves
Bolted Bonnet Design
Size: 2” through 24”
Design compliance to: API600, BS1873, BS1868, IBR
Pressure Rating ASME: CL 150, 300, 600, PN 20, 50, 100
Working Temperature: -196°C up to +550°C & over
Materials: Carbon Steel, Stainless Steel, Alloy Steel, Special Alloys on Request
Connections: Flanged RF, Butt Weld End

 

Ball Valves Series WVE
Floating or trunnion type.
Design: 2 or 3 pieces, top entry or fully welded.
Available also in special execution and for sub sea application.
API 6A and 6D, Fire-safe certified.
Rating: ASME Class 150 to 2500; from PN 16 to PN 100; API 2000 to 10000.
Size: from 1/4” through 48” e over on request.

 

Multilayer Seated Ball Valves Series HTB & HTL
Floating (HTB) or trunnion (HTL) design.
Bubble- tight (zero leakage) at lowest and highest temperatures.
Special multilayer seats suitable from -196°C up to +550°C and over Fire-safe and TA-Luft approved.
Materials: Carbon Steel, Stainless Steel, Special Alloys, Titanium, etc.
Rating: ASME Class 150 up to 2500.
Size: from 1/4” through 48” and over.

 

Forged Steel Gate Valves, Globe Valves & Check Valves Bolted Bonnet Design
Sizes: 1/2” through 2”
Design compliance: FO – API 602, BS 5153, ISO 15761, IBR
Pressure Rating: ASME class 800 & PN 130
Working Temperature: -196°C up to 550°C
Material: Forged Carbon Steel, Stainless Steel, Alloy Steel, Special Alloys on request.
Connections: Socket weld, Butt weld, Flanged on request.

Piston Valves Series BV
Bubble-tight (zero leakage) at lowest and highest temperatures.
No fugitive emissions (TA-Luft and fire-safe certified).
Approved for the handling of liquefied gasses on railway tanks.
Available with flow regulating trim.
Special multi-layer seats suitable from -196°C up to +550°C and over.
Rating: ASME Class 150/600 (PN16 / PN63) and API 800.
Size: 1/2” through 8” (from PN15 up to PN 200).

Forged “Y” Pattern Valves Series WBY
Less fluid turbulence and higher flow coefficient.
Stop, or piston check, or flow control, or stop-check.
Available in special designs and materials for any fluid.
Available with electric or pneumatic actuator on request.
ASME Class: 600, 900, 1700, 2700, 4500 and special Classes.
Size: 1/4” through 4”.

Forged “Y” Pattern Valves Series BLY
Bonnetless-Rising, non-rotating stem.
Stop, or piston check, or flow control, or stop check.
Special anti-cavitation trim on request.
Available in special designs and materials for any fluid.
Available with electric or pneumatic actuator on request.
ASME Class: 1700, 2700, 4500.
Size: 1/2” through 3”.

Forged “T” Pattern Valve Series WBT
Welded Bonnet suitable for very high pressure & severe application.
Available in special designs and materials for any fluid
Available with electric or pneumatic actuator on request.
ASME class: 600, 800, 900, 1500, 1700, 2700, 4500 and special classes.
Sizes: 1/2” through 2”
Connections: Socket Weld, Butt Weld End, Flanged End on request.

Forged “T” Pattern Valve Series BBT
Bolted Bonnet design suitable for very high pressure & severe application.
Available in special designs and materials for any fluid.
Available with electric or pneumatic actuator on request.
ASME class: 600, 800, 900, 1500, 1700, 2700, 4500 and special classes.
Sizes: 1/2″ through 2″
Connections: Socket Weld, Butt Weld End, Flanged End on request.

High Pressure Piston Lift Check Valve
Available in welded bonnet, bonnet less, bolted bonnet, pr. seal bonnet design.
Y pattern: Forged up to 4″
Y & T pattern: Cast up to 26″
Sizes: 1/2″ through 26″
ASME class: 600, 800, 900, 1500, 1700, 2500, 4500 and interpolated special classes.
Connections: Socket Weld, Butt Weld End, Flanged End on request
Operations: Manual or Actuated.

High Pressure Gate Valves Series CMI-S
Pressure Seal.
Split wedge or Parallel slide.
Hand operated or actuated (electrically or pneumatically).
Bypass and/or equalizing pipe on request.
ASME Class: 600, 900, 1500, 2500, 4500 and special classes.
Size: 2″ through 28″.

High Pressure Globe Valves Series CMI-G
Pressure Seal.
Construction: “T” type, “Y” type, angle, “Elbow down”.
Stop, throttling, stop check, piston check.
Hand operated or actuated (electrically or pneumatically).
ASME Class: 600, 900, 1500, 2500, 4500 and special Classes.
Size: 4″ through 24″.

 

High Pressure Check Valves Series CMI-C
Vertical seat (perpendicular to flow), higher flow coefficient.
Pressure seal or bolted bonnet.
Swing or tilting disk.
Available pneumatically actuated (for turbine bleeding lines).
ASME Class: 150, 300, 600, 900, 1500, 2500, 4500.
Size: 2″ through 32″.

 

Stop Valves Bellow Sealed
Bolted Bonnet Design.
Equipped with pneumatic, hydraulic or electric actuator.
Sizes: 1/2″ trough 10″ (DN15-DN250)
ASME class: 150-300 / PN-16-25-40
Working Temperature: -10°C up to 400°C
Connections: Flanged, Buttweld
Materials: Cast Iron, Nodular Cast Iron, Cast Carbon & Stainless Steel.

 

Forged Steel Globe Valves & Gate Valves
Bellow Sealed, Stop Valves.
Seal Welded Bonnet.
OS & Y rising non rotating stem.
Size: 1/2″ through 2″.
ASME class: 800, 1500, 2500.
Working Temperature: -196°C up to 450°C.
Connections: Socket Weld, Butt Weld End Screwed ends NPT or BSP.
Materials: Forged Carbon Steel, Alloy Steel, Stainless Steel.

 

Steam & Condensate Manifolds
Forged body with piston type sealing mechanism.
Patented reinforced seal rings.
Tight shut off, fire safe, Ta Luft qualified.
Sizes: 4, 6, 8, 10, 12 or more connecting stations on request.
ASME class: 150, 300, 800
Working Temperature: -46°C up to 450°C
Connections: Threaded, Socket weld
Materials: Forged Carbon Steel, Alloy Steel.

 

Special BONETTI Valves Series SV
Custom made valves for severe duty applications.
Valve type: stop, throttling, check.
Suitable for urea and fertilizer application, water treatment plants,
hazardous fluids.
Available in various executions and materials, also special alloys.
On request, available with electric or pneumatic actuator.
Designed according to unique customer and plant requirements.

 

Quick Acting Automatic Valves Series AV2 & AV3
Type two ways (AV2) or three ways (AV3).
Designed for H.P. preheaters bypass systems.
Hydraulically self-actuated by the process media.
Operating speed controlled by an external regulating valve.
Manual operation with locking device.
ASME Class 900, 1500, 2500 and special classes.
Nominal diameters up to 18″ size.

 

Blowdown Valves & Blowoff Valves Series BLB, PBR & RSS
For continuous (BLB) or discontinuous (PBR) or intermittent blow-off.
Useful for flow control under high differential pressure.
Needle type (BLB), tandem type with multistage disk (PBR), or ball type (RSS and RSSA).
Available with actuator.
ASME Class 600, 800, 900, 1700, 2700, 4500 and special slasses.
PN 40, 63, 100, 160, 250, 420, 630, 760.

 

Enquire Now